Replacing a UV Lamp in a tanning bed can seem daunting, but it’s really not that difficult. In this blog post, we will walk you through the process step-by-step. So, if you want to replace UV lamp, don’t hesitate to give this tutorial a try!
A UV purification system is a potent water treatment technique that utilizes UV-C radiation to destroy pathogenic bacteria. When organisms, cysts, and pathogens like giardia and salmonella are exposed to UV rays, they become harmless microbiologically unsafe organisms, cysts, and germs such as salmonella are destroyed. UV purifiers, like any other water treatment system, do require regular maintenance in order to function properly and protect their effectiveness. It is the greatest way to guarantee that your UV system is protecting you from germs and disease by maintaining it properly.
Why Replace UV Lamp?
You may have bought a UV water purifier for various reasons: to destroy potential germs, viruses, and other harmful live organisms in your drinking water.
UV lamps have a limited life span. The beads of mercury in the lamp will gradually deplete from the moment it is switched on. After enough time has passed, the mercury’s efficacy will be used up, and UV-C light output from the lamp will be reduced.
The duration of a UV lamp is measured in hours, not gallons of water treated. The majority of UV bulbs have a lifetime of 9,000-10,000 hours, or 375 days. This implies that you should change the UV bulb once a year to keep the system functioning properly.
Some UV water purifiers feature visual or audible notifications, such as a traffic light system or an alarm, to remind you when a new lamp is required. We propose that you make your own reminder on your phone or calendar so that you replace the lamp on time every time.
When UV lamps reach the end of their life span, the mercury that powers them evaporates. As a result, the lamps’ effectiveness drops by more than 60 percent, which means that water passing through the quartz sleeve may not be sufficiently disinfected to be safe to drink.
How To Replace UV Lamp?
Follow this step-by-step process to replace UV lamp:
- Turn off the water. Locate your water main and turn off all incoming water to the property. Make sure all faucets in your home are turned off and that no water-using appliances are running.
- Isolate the UV system. Turn off any power that is being supplied to the UV system. If the system is still hot, wait until it has cooled down.
- Unscrew safety cap and then remove the lamp plug. Keep your skin and clothes away from the lamp. The oils on your skin will harm the quartz sleeve’s integrity.
- Remove the UV lamp and sleeve from the chamber. Remove the old o-rings from the sleeve bolt and discard them. When you install the new lamp, you’ll replace these with new o-rings. Remove the old lamp from the quartz sleeve carefully.
- When replacing the UV lamp, make sure to unplug the unit from the wall outlet and allow it to cool for 30 minutes before handling any internal components.
- Clean the quartz sleeve. Take a cloth damp with CLR and clean any stains or discolorations off of the quartz sleeve. Quartz sleeves are quite delicate, and if you break one, it’s likely to shatter. If you haven’t changed your sleeve in years, this is an excellent time to do so.
- Replace the o-rings on the sleeve.
- Install new UV lamp in assembly. Be careful not to overtighten lampshade, as it may cause it to fracture.
- Insert new lamp and sleeve into the system. Check to see whether lamp is properly aligned with the lamp plug before replacing the safety cap.
- Turn your water back on and check for any leaks. Run water through the system to ensure that performance is unchanged and there are no leaks. Always refer to your manufacturer’s instructions for disinfection and maintenance procedures, as well as any other special instructions.
Conclusion
Keep in mind that UV systems will be configured differently. This might necessitate the use of different procedures to remove and replace the sleeve and lamp during replacement. When you replace UV lamp, you should always clean the quartz sleeve and install new o-rings.
Replace UV lamp every six months to keep the system running at peak performance and to avoid bacteria build-up. If you have any questions, please contact our team today. We would be happy to assist you!
Advantages of Buying Directly from a Manufacturer
In previous times, manufacturers encountered obstacles when it came to directly reaching consumers due to financial limitations. This led to the introduction of distributors, acting as intermediaries between manufacturers and consumers. These middlemen, commonly known
Select Your Right Sized UV Water Purifier
The significance of a UV water purifier for maintaining the cleanliness and health of your water environment, whether it's an aquarium, pond, or a commercial space, cannot be overstated. However, when it comes to choosing
Keep Your Water Safe and Clean with a UV Water Purifier
Water pollution remains a significant issue in the world today, affecting numerous people worldwide. This compromised water quality poses severe health hazards. UV water purifiers have emerged as an effective, chemical-free solution to combat these
