Iron content: no more than 0.3ppm (0.3mg/L)

Hydrogen sulfide: no more than 0.05ppm (0.05mg/L)

Suspended solids: but more than 10ppm (10mg/L)

Manganese content: no more than 0.5ppm (0.5mg/L)

Water hardness: no more than 120 mg/L

Chroma: no more than 15 degrees

Water temperature: 5°C-60°C

Ultraviolet Sterilizer

Safe and reliable sterilization

UV Advantage

Safe and reliable sterilization

Efficient

No Secondary Pollution

Low Maintenance Cost

Scope of Application

Safe and reliable sterilization

Beverage Factory

Community

Swimming Pool

Agricultural Water

Influencing Factors

Safe and reliable sterilization

UV Transmittance (UVT)

An important factor affecting the effect of ultraviolet sterilization is the ultraviolet transmittance or absorption rate of the sterilizing medium (water). Ultraviolet transmittance and medium
The absorption rate is affected by factors such as dissolved organic matter, inorganic matter and undissolved suspended matter in the water.

Suspended Particulate Matter

The effect of suspended particles on the sterilization effect of ultraviolet rays is also very obvious. Suspended particles can absorb and reflect ultraviolet rays, thereby preventing ultraviolet rays.
To the DNA and RNA of bacteria and viruses. The external suspended particles will also accelerate the scaling and pollution of the quartz sleeve, thereby affecting the sterilization effect.

Particle Size

The size of the particles in the water has a greater impact on the UV sterilization effect, because large suspended particles will form a protective effect on bacteria and viruses.
Shadows and dead ends. Generally, the effluent from the secondary sedimentation tank is more beneficial to the sterilization of ultraviolet rays, and the average size of suspended particles in the group water should be less than 30μm.

Suspended Particulate Matter

The exposure time is related to the flow rate. The UV system is generally designed according to the peak flow rate. The smaller the flow rate, the longer the exposure time, and the system
Have a larger effective dose.

Optimal Use Conditions

Safe and reliable sterilization

Iron content: no more than 0.3ppm (0.3mg/L)
Hydrogen sulfide: no more than 0.05ppm (0.05mg/L)
Suspended solids: but more than 10ppm (10mg/L)
Manganese content: no more than 0.5ppm (0.5mg/L)
Water hardness: no more than 120 mg/L
Chroma: no more than 15 degrees
Water temperature: 5°C-60°C

Specification Modle Treated Water Volume (t/h) Equipment Power(W) Size(mm) Work Pressure(Mpa)
MH-40 2-4 40 63*900 0.6
MH-75 5-7 75 76*900 0.6
MH-150 10-15 150 108*900 0.8
MH-200 15-20 200 108*1200 0.8
MH-240 20-25 240 108*1200 0.8
MH-225 20-25 225 159*900 1.0
MH-300 28-32 300 159*1200 1.0
MH-360 35-40 360 159*1200 1.0
MH-480 45-50 480 219*1200 1.0
MH-600 55-60 600 219*1200 1.0
MH-720 70-75 720 219*1200 1.0
MH-840 80-85 840 219*1200 1.0
MH-960 90-100 960 250*1200 1.0
MH-1050 100-110 1050 219*1650 1.0
MH-1200 110-120 1200 250*1650 1.0
MH-1350 120-140 1350 273*1650 1.0
MH-1500 140-160 1500 273*1650 1.0
MH-1650 160-170 1650 300*1650 1.0
MH-1800 170-180 1800 300*1650 1.0
MH-1950 180-200 1950 350*1650 1.0
MH-2100 200-220 2100 350*1650 1.0

Get A Quote

Ultraviolet light is a special form of matter movement, a stream of unconnected particles. Each ultraviolet photon with a wavelength of 253.7nm has an energy of 4.9eV. When ultraviolet rays are irradiated to microorganisms, energy transfer and accumulation occur, and the accumulation results in the inactivation of microorganisms, thereby achieving the purpose of disinfection. When bacteria and viruses absorb more than 3600~65000uW/c㎡, they have strong deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), which can cause bacteria and viruses to lose their viability and reproductive power. Eliminate bacteria and viruses to achieve the effect of disinfection and sterilization.

Your data is always safe with us. We will only contact you in conjunction with your enquiry and your details are stored securely in the meantime. We do not work with third party marketing organisations.